Ikea Hemma Mounting Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mounting bracket for the Ikea Hemma light socket (E26). It is articulated in the Z axis.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 252
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mounting bracket for the Ikea Hemma light socket (E26). It is
articulated in the Z axis. You will also need 2 hex bolts (1/4" x 3/4" or any
equivalent) and the 2 matching butterfly nuts in order to assemble it.
There is a 7 mm hole in the base to mount the bracket on a device such a
tripod, etc. The base is 10 cm x 3cm. The overall height of the bracket is 14
cm.
The holder should be printed upside down. A brim might be required. I did not
needed it.
They can be printed without support.
This object main web page is:
http://www.ctheroux.com/ikea-hemma-mounting-bracket/.
You can request the source files on the page listed above.
Print Settings
Printer: FLSun QQ
Rafts: No
Supports: No
Infill: 30%