Elgato Stream Deck 15 Key Desk Mount (20GAA9901)

So my Dad has an Elgato Stream Deck 15 Key (20GAA9901) and was wanting a desk mount after seeing my Stream Deck Mini Under Desk Mount which was my first Custom 3D Printed Design. (See new Mini Deck Mount here)

This should have less flex than my Stream Deck Mini Design.

I purchased some Digital Callipers and it made designing this much easier, I made this design within 40 minutes or so in Fusion360.

I made this design so that he can screw it under his desk with four screws that he provided to me.
(You might save yourself 30 minutes by putting the design on its side! I didn't think of this as I was sleepy.)

Installation;

There is enough room for some slight side to side movement and maybe some up and down but it should slide in pretty easily.
You slide the cable through the top then the Stream Deck Inside, you could also just slide the stream deck sideways through the bottom which I found to be much easier.

Screws Required;
My dads sharp screws had about a 3.5mm thread so I made the four holes 3.6mm.
You'll then need the screws to go through the 5mm of plastic and have room to go through your desk.

How I recommend Printing;

Print with an infill percentage and pattern that you think will be strongest and tree supports.

Material;
Creality White PLA.

The mousepad is a SOKU DROP X1.

I've provided all of the files so if you want to modify it you can, just mention/attribute me.
There might be a different type of design for mounting the Stream Deck Mini in the future.