Stanley No.702 and 80-702 Portable Vise Jaw
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement jaw for Stanley Tools No.702 and 80-702 portable vise. To make opposite side, simply mirror the stl
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 394
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Replacement jaw for Stanley Tools No.702 and 80-702 portable vise. To make opposite side, simply mirror the stl in your slicer. M3 x 6 screws, with a bit of pressure, will self-tap into mounting holes. While I used PETG at 50% infill, any filament/infill combination should work depending on intent. If you desire using longer screws, I recommend increasing the thickness along the Z axis in your slicer or design software.
This vise can be found inexpensively at flea markets and is a useful hobbyist tool.