1 / 3
Stanley No.702 and 80-702 Portable Vise Jaw — zdjęcie 1
1 / 3

Stanley No.702 and 80-702 Portable Vise Jaw

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement jaw for Stanley Tools No.702 and 80-702 portable vise. To make opposite side, simply mirror the stl

Ocena
0 / 5
Polubienia
2
Pobrania
27
Wydruki
0
Wyświetlenia
394
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Replacement jaw for  Stanley Tools No.702 and 80-702 portable vise. To make opposite side, simply mirror the stl in your slicer.  M3 x 6 screws, with a bit of pressure, will self-tap into mounting holes. While I used PETG at 50% infill, any filament/infill combination should work depending on intent. If you desire using longer screws, I recommend increasing the thickness along the Z axis in your slicer or design software.

This vise can be found inexpensively at flea markets and is a useful hobbyist tool.

Tagi