Liczymy pasujące modele…
UPDATE 04-17-2024: I realized that the ram style mount on the back of the device is also used as a heat sink for the CPU inside the unit, so I modified the mount to include openings to allow for air flow around the aluminum mount plate.…
A drop-in, hanging style wall mount for the Ryobi PCL702 cordless vac. Can be used with or without the battery installed. It is printed with 75% infill modifier block to reinforce the screw clearance holes.
remove the RAM mount ball by unscrewing the centre screw close the hole by screwing the screw back in or replacing it with a suitable M4 screw remove the 4 screws at the corners of the metal plate press 4 pieces of M3 nuts into the…
Deutsch: Die Idee für diesen Fräs-Jig kam mir, als ich dieses Video vom YouToube-Kanal “Gipfelholz” gesehen habe: Da ich keine Tischkreissäge habe, wollte ich das Teil statt dessen einfach drucken. Ich habe das Teil so konstruiert, dass…
This is a remix with added inserts of the excellent parametric rugged box that can hold a ZT-703S oscilloscope/multimeter (or a ZT-702S since they share the same dimensions) and some of its accessories. The two grids have to be glued in…
Hi, the wheel was created to give the mower "Robomow MC / RS / MS / TS / RC" a better grip and a cool look. ---------------------------------------------------------------------------------------------------------- It was pointed out to…
This model is compatible with the lego system.
Remix of the “ Makita wrench grip ” by 3dhobbyist21 . Simple redesign of the original ones to not be round but more oval shaped and using the fuzzy skin option in Prusa Slicer (The 3mf file already contains the fuzzy skin modifier). The…
Update: Version 2 added that fits tighter and has better clips to grip the screen better. I printed my copy using ASA filiment on a Bambu Lab P1S. ASA needs 100c printing plate/bed for this area and preferably an enclosed printer to…
The sun shield for these devices is very shallow, and in direct sunlight from above tends to make it difficult to see the display even at full brightness. Although this design is far from perfect I was able to use Tinkercad to design it.…
Hi, the wheel was created to give the mower "Robomow MC / RS / MS / TS / RC" a better grip and a cool look. Replaced the original Robomow wheel SPP7021A. The two extra holes would be for an aditional hubcap. Looks like a tractor tyre with…
A little bigger than 26mm because I had tolerance problems, exact size in the pictures. Hope you find this helpful and save about 30€.
Replica Panasonic BT-S702N CRT Monitor for Jurassic Park Explorer builds. Includes an LCD variant for small flat panel displays as an alternative. It includes Faux buttons to the real thing, (Non-Operable) Hardware Required: 2x 3mmx12mm…
Clamshell stock for the Mossberg 702 or 715T and Rossi RS22. Currently printing on the weekends will upload photos when done and mod mesh if needed. Elegoo Neptune 4 Base PLA+ 35% infill Supports Normal - Touching build plate
Object description: Grinding fixture for resharpening a Viking Blade 6008 702 0121 and similar garden shredder blades. The fixture fits on all wet grinders with a 12mm rod like from Torrmek, Scheppach, Güde, Einhell, Holzmann, Weldinger…
This model is compatible with the lego system.
A custom tool designed to remove the boiler flange nut/ring on La Pavoni machines (part no. 31104702). Perfect for safe and easy disassembly without damaging components. Printed in PETG (0.4 mm nozzle, 0.3 mm layer height, 5 wall loops,…
This is a fix for the elastic bands in AKG K701, K702, K712, and AKG K7XX headphones. It's been tested on the K712 Pro and should work for similar models. You'll need an elastic hair tie and glue for installation. If you want to you can…
Bleed funnel for newer Shimano brake leveler for use without adapter. Use the original washer. Should fit all M4 brake leveler: Dura Ace ST-R9120 / ST-R9170 Di2 Ultegra ST-R8020 / ST-R8070 Di2 105 ST-R7020 / ST-R7025 Category: Sport &…
This is a remix of the "Commodore 1702 monitor door" by SkaBoyTD. I made a number of tweaks and modifications to his original design. I discovered my Commodore 1702 monitor (NTSC) had some subtle differences with the placement and sizing…
Cover for BME280/BMP180/Si7021 sensors, with labels of pinout Category: Electronics
Przygotowałem model pod mój multimetr kompatybilny z sondami bst 050 jp i ich fabrycznymi zatyczkami. wydruk petg ------- I have prepared a model for my multimeter compatible with bst 050 jp probes and their factory plugs. petg print
If you like, you can also peel the label off the original knob and stick it onto the replacement, as seen in the photo above
A navigation mount for a Garmin Zumo 395 was installed on my Ducati Multistrada when I bought it. I wanted to upgrade to the CarPlay solution from Carpuride with W702 and needed an adapter for the 7 inch display. The adapter is designed…
Best printed in ASA or ABS. Fits perfectly for the CRF1000L. Also needed: x4 M5 Nylock Nuts (DIN985) x4 M5x16 Screws (DIN912) x1 M4x12 Screw with shallow head (DIN7984) 03-Jun-2025: Updated model with a slightly smaller hole for the…
Wanted an extension that tapered down to a narrower opening than the standard crevice tool and also wanted something I could print out of TPU to be able to have some squeeze and give to get into even tighter spaces without worry about…
This is a quick Model of a cage for the SmallHD 700 series of monitors. I quickly modelled it up and haven't tested it, print with TPU or PETG, supports needed. I'll likely go back to improve the model and add a few more features once I…
For this AMAZON Leds.
This is a simple recreation of the plastic rings on the bottom of the standard earpads used with the AKG 701 (and other compatible ones). It will allow you to test many 3rd party earpads (standard 100 mm ones) and see which one works best…
An adapted model to fit the 70 02 160 plier. Printed in 0.3mm with PETG.
Model This is a screen cover for the SmallHD 702 / 701. There are only a handful of 701 / 702 screens left in the world so really the only way to source one is through a donor monitor. Print Settings I would highly recommend printing this…
Replacement for Singer - second spool pin holder (vertical auxiliary spool pin) #68003702 . Printed with PLA and I used supports.
Stick the XT-60 holders in a way that you find most suitable for you.
Radial Fan, 7020 Model, inspired to Delta BFB0712H . Totally editable, published the following elements: Rotor → girante.prt Motor support → corpo_motore.prt Upper Carter → carter_ventola_1_dx.prt / .stl Base Carter →…
A remix of mbmelectronic's model that can be fixed to a wall with screws through the holes
Mercedes Part A 201-727-02-87 This a printable replacement part of the door panel clip for the vapor barrier behind the door panels of various Mercedes models such as the Mercedes W201 (190, 190E) as well as the W124 (E-Class) . Would…
AKG K701/K702 replacement "cover 3" part. In case you broke it while repairing your elastics. Replacement for AKG part number 2458Z46060 or 5023314 (see explosion diagram from AKG ). Category: Parts
I bought a BMW R1200GS and a Carpuride 702B Pro Carplay Display. The R1200GS was missing the BMW accessory mount so I could not use that. It also turns out that the Carpuride 702(B) Pro uses the mount for the BMW bracket or alternatively…
This is a part for the Snapper snowblower model # 8246 called a Block 2-8222. This is not a perfect replica but an approximation. I recommend higher infill for strength. The black part photo is of the original part, the other is of my…
I took apart my K712's to replace the elastic band and discovered how easy it is to take off the small rounded mesh covers. I never liked how they looked -- I always wished they were flat. Now that I have a 3D printer I can fix that…
This is a remix design for my BMW R1200RT 12mm bar. Printed with eSun ABS+ You will need : 4 screw M3 x 25mm 2 screw M4 x 40mm 1 screw M4 X 30mm 2 locknuts M4
-No supports needed -No additional bolts needed
dimension 102x80x40. D65
A modification to the 7530 aux fan to fit a 7020 blower from a projector that I had lying around.
As tactical_snacks put it: A drop-in, hanging style wall mount for the Ryobi PCL702 cordless vac. Can be used with or without the battery installed.
A simple low profile 1/4-20 magnetic mount for a Dell Ultrasharp Webcam (WB7022). More information available here Category: Office
A wall mount for the Sagemcom DIW7022 set-top box, known as the current (2024) set-top box of a Dutch internet/tv provider knowing: KPN. Holes for the screws are 3mm in diameter, with a 4mm diameter drop to hide to top of the screws. The…
Honda Side Cover Collar - Africa Twin RD03_RD04 and many other models - Collarino Carene Laterali Honda Part Number 84702KV0670 - 84702-KV0-670 The Collar is used on 9 models from 1990 to 2014: Honda VF750C Honda VT1100C2 HondaVT750C2…
The stock sphere for the mount is badly made with a flat part (see pic.) that make the grip by the RAM arm worse, causing the device to move around despite the screw being really tight. So redesined the sphere, with now better clearance…
This mount fits the new printnc v4. Inner diameter: 65mm Should work with: - makita rt0700 - makita rt0702 Print Settings Printer Brand: Bambu Lab Printer: x1 carbon Supports: No Resolution: 0.2mm Infill: 60%
Ich habe in meiern Werkstatt meine Staubsauger alle auf 40 mm HT-Rohr adaptiert. Daduch bin ich maximal flexibel. Also muss auch die Makita an das 40 mm System. Abei der passende Adapter Druck ohne Support; 0,4 mm Nozzle; 0,2 mm…
This is the anode cap remover needed for BVMs like the 1910, 1911, 2010 or 2011. It's needed because these models have an additional contact for the convergence voltage in the anode cap itself. Tested and works.
Simple holder for adapters for capsules and ground coffee of the Catler ES 702 coffee machine. I recommend printing with the back side on the bed, then no supports are needed. 2 perimeters and 5-10% infill are also enough. There is space…
This is simple housing for a Siemens Sirius ACT EStop that will fit on 4040 VSlot profiles on the Ender 3 and be secured by the sheet metal control board compartment. The two rectangular cutouts on the back cover are made to fit two WAGO…
Probably not going to be a popular one as I don't see many people using this exact sensor in their projects. I'm actually impressed with the little guy, and for the price, it serves its purpose. Using it to measure the temperature &…
This will mount a Zoyi ZT-702S or Xeast XE-702S (same product just different branding) to Multiboard using Multiconnect. You will need to print the Multiconnect connectors here:…
This enclosure was designed for the XY7025S DC buck converter/power supply module, which I purchased from AliExpress. The module does not include a case, making it awkward and unsafe to use as a bare board, so I designed this custom…
You need an (OPTIONAL M8 and) M5 Thread drill. You need also (OPTIONAL a M8 30mm screw ,) 4x M5 20mm screws and a 300mm M12 Screw. The M8 Screw is for a better durability.
A caddy for your Dell DELL MZ60045 caddy: a caddy². It fits 3020 7020 9020 SFF PCs, and possibly others. This allows you to repurpose the optical drive slot on your Dell caddy, and mount a 2.5" SATA drive in its place. Drives clip in and…
Safety lever for Cyma CM.M702. This safety may be compatible with other airsoft weapons like Cyma CM.701 etc. But I haven't tested that. I would suggest you print this model with something more robust than PLA but you can try and let…
Replacement for the Oval Type Sign on your W639 Mercedes Benz. The base model is just blank. Engrave your logo or custom text using the PrusaSlice 3mf. My company logo provided just as demo. Install using double sided tape. Replaces…
For Ender 3 Bed Leveling
fix elastic problems by using hair rubber band instead
Printed with Galaxy Black PETG Nozzle Temp: 230c Bed Temp: 85c 1st Layer, 90c higher layers PrusaSlicer 0.20mm SPEED settings - 4 perimeters, 15% infill Position - Knurled End Down No Supports
3D druckbarer Oberfräsenlift für eine Makita RT0702C Oberfräse. Es werden zusätzlich noch folgende Kaufteile Benötigt: 1x M8x50 Senkkopfschraube DIN 7991 1x U-Scheibe D5,5x15 4x Stahl oder Edelstahlstange D10x60mm 6x M4x95mm…
I modified the authors original mount to be used with the IKEA Skadis system. This mount is for a Ryobi PCL702 hand vacuum Parts: (3) M3 x 12mm long SHCS (3) M3 T-Nuts for Skadis by ORM - Found Here Print Settings: Material: PLA
Print it with the screw holes on the build plate, no supports required. I used ABS, but inside a house any filament should be fine.
8x šrouby a matky M5 - 30 mm s nízkoprofilovou hlavou (matky upevněny teplotavným lepidlem) 1x šroub M4 30 mm hrazda 11 mm obalena slabě gumovou páskou proti prokluzu
Makita RT0702 Oberfräsen-Tisch + Schablone Beschreibung Dieser Frästisch wurde speziell für die Makita RT0702 Oberfräse entwickelt. Die Befestigung erfolgt über den originalen Halter der Oberfräse mit den 4 Standardschrauben – es werden…
I recommend printing this at 0.2mm with 100% infill, using PETG or another strong and heat resistant material. You will have to remove the brush holders/springs from the old assembly and attach them to this new one in order to use it.…
It's a remix of https://www.thingiverse.com/thing:2189509 - added a Zip tie place and it has two configurations: mounting option with screws mounting option with 8x3 mm magnet (as the one you use for extruder visualization). both options…
Replacement jaw for Stanley Tools No.702 and 80-702 portable vise. To make opposite side, simply mirror the stl in your slicer. M3 x 6 screws, with a bit of pressure, will self-tap into mounting holes. While I used PETG at 50% infill, any…
Summary: I purchased some iSelector (SM-PM702) smart plugs to try to flash Tasmota firmware on. I tried to come up with a least intrusive way but in the end you still will need to get to GPIO 1 located in a hard to reach place in the…
This is a scale, printable model of the SparkFun Humidity and Temperature Sensor Breakout board for the Si7021, which has an I2C interface and costs around $10.95. The product page for this device can be found here . I managed to print…
General Information The model has been designed to fit my bathroom cupboard door which has a width of 16mm. I have uploaded a CAD file that you can use to change the width or to remix it. If you need another CAD format let me know. I can…
The template guide provides a 22mm sleeve through which the trimmer bit passes, allowing use of the trimmer with template patterns. The original Makita template guide has a 10mm sleeve, allowing a perfect match with the 22mm template…
Voici mon travail pour installer mon écran Carpuride W702plus sur ma CFMoto 800MTES. Il y a les plans Solidworks et le gcode PrusaSlicer pour du PA12 Sunlu, buse HF0.6mm
UPDATE: Added a newer clip design to allow you to attach it to a printer with belts that sit in front of the X-axis rail (e.g., in a Mercury One setup). This is a separate file. Also adjusted the height of the original bracket to help it…
I have a snapper model 280812BE (80422) - Snapper 28" Rear-Engine Riding Mower, 8hp I designed this as a drop in replacement part for: Snapper 7022344 CABLE, Brake (Superseded to 7022344YP) The issue is they wanted to charge me ~$40.00 w/…
Designed to hold small humidity/temp sensor (in my case the si7021) with louvered front to protect them from direct sun etc whilst still allowing air flow. The back is friction fit, use a little glue to secure. I haven't added any holes…
I was looking for a pair of filter for my mask, an Honeywell Valuair, but now they are too expensive or impossible to find and in a search i found the MK2 design of TentaCat0702 and got the idea of the adapter, bought a 3d printer, drawn…
Really liked the magnetic privacy cover that came with the webcam, but didn't like how it didn't allow you to use Windows Hello facial recognition with it on. Designed this cover so that it will only block the camera and leave the other…
hello i have made this to fit the originalscreen and on top a 5" carplayscreen it is a work in progress feel free to play around with the file 2 files one with bracket the other one just fits over it i made an aluminium bracket for the…
Simple model, simple usage. Print the model, put it into the ring light, put webcam inside.
Just a simple case with a snap-in lid. I also added the blend-file if you want to modify it for your use case.
Cilindro per supporto valigie Benelli TRK 702, consiglio stampa in ASA o meglio ancora ASA-CF, sconsiglio PLA e non raccomando PETG. Per eventuali migliorie sono a disposizione.
An example 3D printing can be useful also for mechanical parts manufacturing. Maybe someone find this model useful. My original coupler of Grain mill Bosch MUZ5GM1 has broken. It is made of some plastic material. So I decided to design a…
A wall/ceiling mount for a GV-TDR4702 seris mini fixed rugged ip dome camera. Intended to use the mounting screws that come with the camera to fix the camera to the mount and there are 3 clearance holes for 3/16" tapcon concrete screws.…
Ersatzteil, auf dem Bild rot, für einen Verschlussklip vom Staubsauger Kärcher NT702 ECO. Layerhöhe 0,2 mm Sollte aber mind. mit PETG gedruckt werden. 50% Infill Viel Spaß damit. Spare part, red in the picture, for a locking clip from the…
This is an adaptor bracket to allow you to mount a smaller speaker in a Commodore 1702 monitor, the default is a 4" square speaker (I only had a 3" on hand), I also included my SCAD file so you can adjust it for the specifics of your…
70x20mm Radial Fan 7020 Duct to D.80 cooling pipe adapter. I made this adapter to install my 7020 BFB0712H fan to my 3D Printer enclosure, to evacuate the ASA/ABS smoke during 3D print operations. In the .zip folder you can find the Creo…
A short yet wide tool for the Ryobi PCL702 hand vaccum. This one fits the vaccum perfectly and does not leak like some other tools for this vaccum. I printed in transpartnet PLA and it has held up great for months of use. If printing in…
Since I had the device without any feet I created the new one based on the pictures from internet and measured geometry of openings.
a key chain of DaniProGamer 0702 yotube pip (subscribe) printer settings: Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Plus Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2mm Infill: 0% Filament brand: doesn't matter…
Print slowly and at 45 degrees when viewed from above to prevent any axis issues like banding Obviously modify if you want a specific length, made during lockdown so I dont remember what the numbers in the filenames mean
3d printable version of an SES mPower satellite based on the Boeing BSS-702X Bus. Personally built using Autodesk Fusion 360 with the assitance of Claude AI
This enclosure covers the Avalanche Photodiode module and allows for mounting to optical tables and attachment of common optical filters and tubes. This enclosure comes in 3 pieces: Body A Body B Face Print the Face at a high resolution…
Náhradní příchytka kartáčků pro robotický vysavač Sencor SVC 7020.
This model is a simple wall mount for the INBUS® 70273 inbus key set. It is designed as a tight fit with no wiggle but still easily slides in and out. Both pins have the same length despite the set being thinner on the right side so you…
