Dot matrix display Clock frame with shader
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.44 – €0.54 net (excluding VAT)
For file: Clock-body-module-holder_0.15mm_PETG_MK3S_37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.49 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 36.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Shade/frame for 8 dot matrix display modules. It have a 1mm free space at wide sid because so PCB's is not precission.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 42
- Makes
- 0
- Views
- 481
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Display shade for DOT-Matrix 8 display modules 32x32mm. It has a millimeter gap in width and 0.3 height, because not all modules have an exact PCB board. Snap clips then hold the display pressed to the screen. The thickness of the screen is 0.3 mm and the photos show the display set to minimum brightness. The print is designed to print from white PLA and the print file is set to print a right angle fill layer.
2023-03-30: Updated, added all parts for print entire clock