1 / 4
Dice Tower
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.32 – €0.39 net (excluding VAT)
For file: Dice_Box_Pins_v2_0.2mm_PLA_MINI_25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.35 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 25.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Folding Dice Box that transform into a Dice Tower
- Rating
- 4.818 / 5
- Likes
- 671
- Downloads
- 2,681
- Makes
- 43
- Views
- 14,456
- Reviews
- 33
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Standard Digital File License
Features
- Bigger, Better & Easier to print
- Each part can be printed individually
- The long bridge can be printed using support
- This is an updated version of my previous Dice Tower
Be advised this model may be hard to print
- Your printer must be well calibrated because it's a very tight fit
- You may see this model as a torture test for your printer and your skills
- Choose a filament that is easy to print with a very fine tune profile
- Try with the tolerance test print first
Print Instructions
- Use Default 0.20mm QUALITY Prusa Slicer Print Settings
- For better quality, print the parts individually
- Filament : PLA (and maybe PETG)
- Perimeters : 2~3
- Dice Box Tower
- Supports : For support enforcers only
- Use Paint-on supports for the bridge
- XY separation : 80~100%
- Style : Snug
- Dice Box Cover
- Brim : Absolutely Yes
Change Log
- 2023-04-01
- It's done, I’m open to suggestions ;-)
- 2023-03-31
- The Hex Dice Box Tower now has reinforced top side panels
- So it can be printed with only 2 perimeters
- The Dice Box Cover now has feet
- Improve the overall stability of the box when opened
- The Hex Dice Box Tower now has reinforced top side panels
- 2023-03-30
- The Hex Dice Box Tower now has thicker walls
- It is almost easy to print ;-)
- The Hex Dice Box Tower now has thicker walls
- 2023-03-29
- Added another Dice Box Tower with a HEX Pattern
- Looks pretty nice, but it is really hard to print :-/
- Added another Dice Box Tower with a HEX Pattern
- 2023-03-27
- Replaced the Dice Box Screws by Push Pins
- Added a Tolerance Test for the Dice Box Push Pins