1 / 7
Raspberry Pi 3 (B/B+) case, VESA mount, internal fan
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for a Raspberry Pi 3 (B/B+) Features VESA mount (75mm x 75mm) Internal fan mount (40mm x 40mm x10) Thread inserts…
- Rating
- 5 / 5
- Likes
- 62
- Downloads
- 453
- Makes
- 6
- Views
- 3,327
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Case for a Raspberry Pi 3 (B/B+)
Features
- VESA mount (75mm x 75mm)
- Internal fan mount (40mm x 40mm x10)
- Thread inserts (case and pi mounts)
- Footer pins optional
Required parts
- Raspberry Pi 3 (B/B+)
- Fan 40x40x10, 5V → Noctua NF-A4x10 5V incl. anti-vibration mounts
- 4x Anti-vibration mounts (See fan)
- 2x 1P Single Dupont connectors
Mount case
- 4x M3 thread inserts → Ruthex RX-M3x5.7
- 4x Cylindrical head screw M3 x 16mm
Mount Raspberry Pi / fan
- 4x M2.5 thread inserts → Ruthex RX-M2.5x5.7
- 4x Cylindrical head screw M2.5 x 16mm
Optional M3 thread inserts and screws can be used. Attention the mounting holes on the Raspberry Pi must be redrilled.
This case is inspired by 0110-M-P's design of a Raspberry Pi case
Print instructions
GPIO pinout
Fan red cable (Positive pole)
- 100% fan speed: 5V power pin e.g. GPIO 2
- Reduced fan speed: 3V3 power pin e.g. GPIO 1
Fan black cable (Negative pole)
- Ground pin e.g. GPIO 6