Brantz Retrotrip Electronic Speedo Interface Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for the Brantz Electronic Speedo Interface (BR5)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a very basic enclosure I designed in FreeCAD for the Electronic Speedo Interface (BR5) made by Brantz ( https://www.brantz.co.uk/product-page/electronic-speedo-interface-br5 ).
I did not want to velcro or double sided tape the interface to the instrument cluster of the Porsche 928 the Retrotrip was installed in, so this enclosure is the result of it.
After printing you just push the interface in the enclosure and in my case the bottom part was a snug fit so it didn't need any glue to be held in place.
I didn't think about uploading the model anywhere so there is no photos of it printed.
Included are STL files for slicing directly and the FreeCAD files if you want to edit it with text on it for example.
I used a .4mm nozzle .2mm layer hight and 15% infill with 3DJake Tough PLA Black and it came out rock solid.