XT60 multiplier box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There is not much to say. If you need more than 1 XT60 at a time and dont wanna diasychain your cables. Then this is for you.
The V2 Deckel (lid) has stronger bridges.
In the pictures you see screws, securing each XT60 connector. You ONLY need them if you do not use rigid wire (what I did and so the screws are not necessary) to combine the XT60s. If you use for example silicone cables, to connect each XT60 to the other, then you could pull out the XT60 at the try to disconnect your XT60 from the box and then I recommend using these screws to secure the XT60s in place.
As screws for the Box itself, I use M4x10: https://amzn.to/42LiaKG
Happy printing
Sandor - DM4DS
if you feel that I earn it, please send a tip or support me on Patreon:
https://www.patreon.com/dm4ds
https://paypal.me/dm4ds
or buy me a coffee!
https://buymeacoff.ee/dm4ds
Thanks for your support.
Sandor - DM4DS