Prusament YoYo
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.95 – €2.39 net (excluding VAT)
For file: YoYo_0.1mm_PLA_MINI_2h45m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.17 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 2.75 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
YoYo inspired with Prusament Spool design
- Rating
- 4 / 5
- Likes
- 56
- Downloads
- 535
- Makes
- 4
- Views
- 2,309
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Public Domain
Made with 3D printed marketing gadgets in mind.
Preferred thread length is something around 120cm (before assembly)
Assembling this is rather simple - just put end of the thread of your choosing into the mounting thread and then firmly thread parts into each other, using integrated clockwise thread
If you have any trouble threading these up, just try to shortly thread anticlockwise before threading clockwise to get parts lined up with thread threaded inside the thread
Feel free to cut out graphic of choosing onto thread-covering parts
Print settings (preffered, but kinda importante)
- No gap filling
- Concentric filling of the bottom layer
- Filling the upper layers with the Archimedes Spiral
- Fill 100% with concentric (at least with PLA (~1.3g/cm^3), but since it's YoYo usually denser is better)