1 / 3
M5 Nut and Bolt (For Radius gauge 1-20 mm by mibla)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
M5 tapered bolt head with 4mm hex key. M5 nut. 0.12mm layer height
- Rating
- 4.714 / 5
- Likes
- 33
- Downloads
- 430
- Makes
- 10
- Views
- 1,350
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
M5 Nut and Bolt designed to fit Radius gauge 1-20 mm by mibla.
Bolt has a tapered head and partially threaded to allow flush fit. 4mm hex key required to tighten.
I printed mine with a 0.12mm layer height and threads on with minimal resistance.
You may need to heat either the head of the model or hex key if it's too tight.
Will require your printer to be well tuned or go over the threads with a tap and die.
