1 / 3
M5 Nut and Bolt (For Radius gauge 1-20 mm by mibla)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M5 tapered bolt head with 4mm hex key. M5 nut. 0.12mm layer height
- Ocena
- 4,714 / 5
- Polubienia
- 33
- Pobrania
- 430
- Wydruki
- 10
- Wyświetlenia
- 1350
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 10) (Komentarze: 14)Remiksy (0)Kolekcje (70)Powiązane
M5 Nut and Bolt designed to fit Radius gauge 1-20 mm by mibla.
Bolt has a tapered head and partially threaded to allow flush fit. 4mm hex key required to tighten.
I printed mine with a 0.12mm layer height and threads on with minimal resistance.
You may need to heat either the head of the model or hex key if it's too tight.
Will require your printer to be well tuned or go over the threads with a tap and die.
