Bottle holder for HSW mostly parametric
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mostly parametric bottle holder to fit into the insert from the original HSW.
- Rating
- 4.6 / 5
- Likes
- 77
- Downloads
- 424
- Makes
- 12
- Views
- 1,352
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed some bottelholders for my HSW but could not really find one. As bottle sizes differ, you can make them in the size you need. Just open the .f3d in Fusion 360 click on “Modify” and “Change Parameters”. Change the parameter “Bottlesize” to you appropriate size - you might want to add .4mm of tolerance, or so.
The height parameter can be easily changed there as well. In the default it is Bottlesize/2.
You need the insert-empty, from the original HSW to fit in the hexagon pegs from the bottleholder. That fit is very tight with my printer (picture 3), but I am sure that connection now is permanent ^^
Update: Uploaded a file with the single hexagon attachment. Should work for 50mm and smaller diameters.