Ender 3 (Pro) X-axis motor cover with modified endstop mount (0 - 5 mm offset)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An Ender 3 (Pro) X-axis motor cover with a modified endstop mount to make full use of the bed.
- Rating
- 5 / 5
- Likes
- 105
- Downloads
- 595
- Makes
- 7
- Views
- 4,204
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An Ender 3 (Pro) X-axis motor cover with a modified endstop mount to make full use of the bed in the X-direction. It always bugged me, that the leftmost 3 mm of the bed were out of reach for the nozzle on my Ender 3 Pro, because the endstop protruded too far from the X-axis motor cover. This re-engineered motor cover solves that problem.
The design is optimized for FDM printing and available with different fixed offsets (+1 to +5 mm) for the X-endstop, as well as with a slotted hole with variable offset. A version with the stock mounting position is also provided. Due to the stronger screw holes and the guaranteed straight mounting of the endstop, I recommend using a fixed offset version. On my machine, +3 mm were spot on.
I assume that this design also works on the original CR-10, because it shares many parts with the Ender 3. But I can't test that, as I don't have a CR-10 at hand. If you do, let me know in the comments, if this worked for you.
Print settings
- Layer height 0.2 - 0.3 mm
- Line width 0.4 mm (can be higher if a slicer with the Arachne engine is used)
- Infill 20 - 30%
- 4 wall lines
- 10 bottom layers (less with layer heights >0.2 mm; essentially, the first 2 millimeters of the part above the bed should be solid plastic)
- 5 top layers
- Supports not required
Approximate print time @ 60 mm/s: 1:40 h