Bushing, chamfered, flanged, tapered, customizable and parametric,
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a customizable bushing, with chamfers, and options for a flange, tapered ID and tapered OD.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 40
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Bushings are useful for adapting shafts and holes. With the chamfer and flange options, the bushing can fit in holes with eased corners, and can support itself in a drilled hole.
The taper options make the bushing into reducer or cone. Pasting a couple bushings together can adapt different sized shafts.
The adapter0p625_poleTaper is a combination of two bushings, used to mount a 5/8" threaded shaft on a taper-ended rake-handle for holding a GPS antenna. A plain 5/8" bushing to match the threaded shaft was combined with a bushing tapered to match the rake-handle-end. Multiple bushings could be assembled together in OpenSCAD or within PrusaSlicer.