Bushing, chamfered, flanged, tapered, customizable and parametric,
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a customizable bushing, with chamfers, and options for a flange, tapered ID and tapered OD.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Bushings are useful for adapting shafts and holes. With the chamfer and flange options, the bushing can fit in holes with eased corners, and can support itself in a drilled hole.
The taper options make the bushing into reducer or cone. Pasting a couple bushings together can adapt different sized shafts.
The adapter0p625_poleTaper is a combination of two bushings, used to mount a 5/8" threaded shaft on a taper-ended rake-handle for holding a GPS antenna. A plain 5/8" bushing to match the threaded shaft was combined with a bushing tapered to match the rake-handle-end. Multiple bushings could be assembled together in OpenSCAD or within PrusaSlicer.