1 / 6
Cufflink with Open Hardware and open source logos
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a cufflink, with the Open Source Hardware logo on the primary side, and the Open Source Logo on the secondary…
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 163
- Makes
- 2
- Views
- 877
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Men
- License
- Creative Commons — Attribution
This is a cufflink, with the Open Source Hardware logo on the primary side, and the Open Source Logo on the secondary side.
Next time you attend a fancy event, let others know you are a maker!
Print instructions
Print laying on main face, no supports needed, works fine with PLA 0.2mm layerheight.
To print using multiple colors, just add colorchanges in prusaslicer.
I printed on the mk3s without any problems in around 15 minutes.