Dual SCSI port 80mm fan duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dual SCSI port to 80mm fan duct, with parametric FreeCAD (link branch) source.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
An old server PC case had openings for dual SCSI ports (full-sized 50-pin connectors) and not enough cooling for modern components. Solution: remove the knock-outs for the SCSI ports and snip the center section between them, then install this fan duct. This duct could also be useful with re-purposed external SCSI drive enclosures.
The 80mm fan .step file uses #4-1/2 sheet metal screws that self-tap into plastic, and the fan is offset slightly (Y - 8mm) to allow better fit. Print this with something heat-resistant, like ABS or ASA. I used 8 walls and no infill with a 0.4mm nozzle.
Created with FreeCAD Link Branch. In the FCStd file, the fan and screw sizes are parametric. The fan sketch is on a separate plane from SCSI outlet, so it can be angled and translated to fit. Feel free to remix your own!
Released under CC-0 (public domain, no warranty) license.