1 / 3
Makita DVC750 "No Pain" Handle - Better Carriage Handle for Cordless Portable Vacuum Cleaner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A carriage handle that you no longer pinch your fingers on.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 24
- Makes
- 0
- Views
- 602
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The vacuum cleaner is great, except for one small detail: you regularly jam your fingers on the carriage handle. Probably happened to everyone who has ever worked with the vacuum cleaner. Here is the solution.
Instructions
- Print both parts
- Insert 4 filament pieces for alignment
- Glue both parts together with super glue. Do not apply glue in the area of the filament pieces
- Open battery compartment completely
- Remove the original handle. Position the screwdriver as shown in the picture and carefully push it towards the center of the unit.
- Install new handle.
- Close battery compartment
- Smile because you won't pinch your fingers so easily anymore
Print Settings:
- 3 Perimeters at 0.6mm Extrusionwidth
- Variable Layerheight (0-9,5mm 0,30mm / 9,5-12mm 0,20mm / 12mm- 0,10mm)
- 3 Bottomlayers
- 4 Toplayers
- 20% Gyroid Infil
Printed in eSUN ABS+
Used filament ~80g
Print Time ~2h30m
Remember: If you do this and something breaks or if someone gets hurt, it is fully your responsibility. I take no responsibility.