1 / 3
Ukulele t.bone ovid microphone holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ukulele t.bone ovid microphone holder
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 141
- Makes
- 0
- Views
- 909
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
An ukulele microphone holding clip for the t.bone ovid system cc100 microphone.
The holder consists of 4 separate models:
- Top clip part with microphone holder
- Rod
- Bottom clip part
- Pad (2pcs, should be printed with some foamy/flexy material)
I printed it with standard 4mm nozzle in PLA with no support. The rod is a separate part so I could print it lying down.
After the print I glued the top clip to the rod. To secure the bottom part I used 3mm screw and a nut (you can also use a 1mm thick wire to secure the bottom part). Then I printed pads in TPU and just press-fitted them in place.
Sand/file the tiny clip open if you have trouble fitting the microphone gooseneck in.