Two-Color Alphabet Small Letters with embedded Magnets
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.18 – €8.77 net (excluding VAT)
For file: letter_set2_02mm_pla_mk3s_8h36m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.98 excluding VAT (range midpoint).
- Weight reported by the author
- 87 g
- Print time reported by the author
- 8.59 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a full set of all small letters of the alphabet. It is a two-colour PLA print with embedded magnets.
- Rating
- 0 / 5
- Likes
- 43
- Downloads
- 210
- Makes
- 0
- Views
- 1,327
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
This is a full set of all small letters of the alphabet. It is a two-colour PLA print with embedded magnets.
You need enough 4x5 mm cylindric neodymium magnets to embed into this print. These can be bought cheap in large quantities.
The letter distribution of the original files is for the German language. Most used letters are printed in multiples. Use the model files to adjust the quantities for your language.
Print instructions
- Start with Prusament PLA Vanilla White
- The print will stop at Z5.0 for a filament change.
- Load the colour filament.
- The printer will stop to embed the magnets in the print.
- Insert all magnets and resume the print.
- Done.
About embedding the magnets:
- Do not use a steel nozzle!
- Make sure the polarization/orientation of all magnets is the same! Glue a magnet into a piece of wood and use it to check the polarization of all magnets before you insert them into the print.
- The 4x5mm magnets will snap into the holes and stick to the steel sheet at the bottom.
- Check if all magnets are inserted flush and are not visible from the side before you continue the print.
Explore More from Meti·kumi
Interested in my designs? Browse through my collection of 3D models:
👉 https://metikumi.com/3d-models/
Stay connected on social media for the latest updates and work-in-progress insights: