Zippy Balisong Inspired Balisong(M3)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Saw some of Zippy's stuff and decided that I wanted to try and make something similar. Uses M3 hardware(12mm screw).
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 193
- Makes
- 3
- Views
- 2,333
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Public Domain
Tolerances basically don't exist. You'll need decent calibration. Alternatively, just make the blade a little thinner in slicer, or the bushings a little taller.
The holes in the blade/handles fit 6x3mm magnets. For balance, I'd print at 100% infill, then add all 5 magnets. Feels nice to me(handle biased). 100% infill also makes it sound like wood, which is cool.
Uses M3 screws(12mm) and nuts.
If the handles start to clack/hit each other, then check your bushings. In my experience, the handles clacking means the bushings wore out and I need to reprint. I can feel the handles and they slide around in the bushings. After reprinting, they don't and the handles don't clack.