Zippy Balisong Inspired Balisong(M3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Saw some of Zippy's stuff and decided that I wanted to try and make something similar. Uses M3 hardware(12mm screw).
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 193
- Wydruki
- 3
- Wyświetlenia
- 2335
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Public Domain
Tolerances basically don't exist. You'll need decent calibration. Alternatively, just make the blade a little thinner in slicer, or the bushings a little taller.
The holes in the blade/handles fit 6x3mm magnets. For balance, I'd print at 100% infill, then add all 5 magnets. Feels nice to me(handle biased). 100% infill also makes it sound like wood, which is cool.
Uses M3 screws(12mm) and nuts.
If the handles start to clack/hit each other, then check your bushings. In my experience, the handles clacking means the bushings wore out and I need to reprint. I can feel the handles and they slide around in the bushings. After reprinting, they don't and the handles don't clack.