Liczymy pasujące modele…
This print was a request from someone, I figured why the heck not? I honestly learned a lot through the design and print of this one about clearance dimensions required for 3D printing without having the layers stick together between…
Working butterfly comb, print 2 handles and one comb. It's quite tight to clip it together, but you don't want it to fly apart mid swipe. It works really well. Printed in both PLA an PETG pretty good results for both. Print Settings…
These are a great example of "Print-In-Place" 3D printing, there is no assembly and these utensils are ready to use right from the print bed. Previously I had made the Tanto and the Trainer blades, but knew in the back of my head that…
My son wanted a trainer balisong (aka butterfly knife) for his Halloween costume. I found a few 3D Printable designs out there and printed them. But the weight and size never seemed right. So, I figured I would just custom design one for…
A print-in-place balisong trainer knife. Supports are needed for the pins and handles. I recommend printing at 0.10mm for the internal pins for a smooth rotation. The rest of the print can be printed at whichever layer height suits you.
BEST PRINTED WITH PETG I modelled this in Blender while making sure it can function when printed. All you need is glue to glue the two hinge parts together while inside the handle and blade. It should take around 4-5 hours for 100% infill…
The original print (without the lock) was a request from someone, then the lock for the handles was a request from more people, I figured why the heck not? Sounds easy right? After a couple of design attempts I was able to get one that…
Best results with organic supports for handle’s rounded parts (flat side down) and organic supports for blade (tip up). If necessary, sand or file surface of holes and pins where blade fits into handle for smooth movement. For a clean…
Balisong trainer with a blunt blade that's designed to be public and child friendly. Inspired by Squid Industries' Squiddy and Benchmade 62 . Print two sets of handles, one top and one bottom, with one set mirrored. Assemble with four…
Balisong butterfly knife toy. If you beginner in flipping knives i recommend printing mine remixed version beacuse its more durable. Oryginal version is of course prettier but standing prints are less durable. Print settings: Layer height…
A pop in place balisong knife that works realy well Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.1 Infill: 100% Filament: Ultimaker Base PLA/PETG Black Notes: dont print faster than…
It got 2 types of blades and 3 types of handles 1 blade of choice blade fillers optional if using the blade with triangles needed if using the blade with lines 2 handles of choice optional infill for the triangle ones 2 pivots optional 4…
.stl files versions of Sanford Prime's balisongs.
7/19/23 UPDATE: I have uploaded the individual pieces for easy replacement part prints. V4.1 is a newer, smaller version. Much easier to handle This pen holder was designed to be used with a 9mm OD pen. I'm sure you could scale the whole…
las uso para el modelo: BB Gun | 4 Shots | built in magazine por PeliX3D | Descargar modelo STL gratuito | Printables.com , impriman la bala al 87% o 90% (DE TAMAÑO)
As the original model was close to perfect (but not close enough for me ;)) I decided to further improve it. The red handles in the pics are the original handles, the other are some prototypes of my remix. The one with orange/black…
Another TikTok knife I wanted in my collection ;) 努力做宝宝 (@_1023625) did a great job with this model. Since I didn't have flathead screws I adopted the model to regular ISO hex cap screws (M3 10-12). Also, I made the blade a tiny bit…
Based on the balisong (https://www.printables.com/model/144597-benchmade-62-balisong-butterfly-knife-m3-fasteners), I created a comb remix. Same principle, same handles, but the blade is now a comb. So it protects the comb while carry in…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Check out my new Toy Switchblade design here . This is a revised version of my first balisong design. This new design is balanced better for flipping, very durable, and easier to print. There are also many options for customization. There…
您好，如果您打算下载此模型，请考虑留下赞、发布制作、留下评论甚至捐赠。谢谢！ Hi There, if you plan on downloading this model please consider leaving a like, posting a make, leaving a review, or even a donation. Thank You!…
The original model looks great, but I found it to not move as freely as I would like, although this could be due to my printer settings. Even replacing the printed parts with screws doesn't eliminate it entirely as I could not tighten the…
🇮🇩 Selamat Datang di Indonesia Welcome to Indonesia! This model was created by Dany Sánchez . The Gates of Heaven are the main entrance to Pura Lempuyang , a Balinese Hindu temple or pura located in the slope of Mount Lempuyang in…
11/28 UPDATE - Added a newer version of the top and bottom handles with chamfered edges making it much for ergonomic. After the success of the balisong pen holder, I now present the lighter holder. Full size lighter coming in the next…
_You will need OrcaSlicer for this file to load correctly_. I tried with Bambu Studio and it does not (currently) open seamlessly. I don't know if PrusaSlicer will do better. I have tried to label the build plates in a way that makes them…
CyberPunk Balisong (Comb) Arasaka logo + full printable hardware/ Perfect trainer knife
Made for BIC ink, it should fit snuggly into place. Features a line in the middle to check ink levels and working balisong mechanism. Has a small snap feature on the back to keep the “handles” away when writing. Also, updated with a small…
Basic balisong from Team Fortress 2 for training or cosplay.
Butterfly knife blade (Butterfly Comb / Balisong Comb)
Print two sets of handles, one top and one bottom, with one set mirrored. Assemble with four 10mm or 12mm long M3 screws.
Edit: I've reverse-engineered the model into proper STEP files if you want to edit it. Also available on OnShape under the name Balisong Mk II. The STEP files are the most up-to-date files and the ones I would recommend using. With…
My chab like butterfly trainer use 2 m4x9 screws and 2 m5x18 for the weights
Butterfly knife from regrevator, this is a butterfly knife that is remixed from another person, if you want to see the original one you can head below and see it! If you get to print one, please upload a picture!!!! I will really…
Print instructions: The pins MUST be printed with 100% infill, to do this in Cura, select the pin, on the left side of the screen select Per model settings>select settings>infill density>100% You may need to print the handles with a brim.…
Product Info Ever wanted to test your butterfly knife tricks without afflicting self-injury? Maybe you'd rather just enjoy having one to flip around? Here is a balisong you can print for practicing tricks in the shapes of random…
I took a look at admin's "Benchmade 62 balisong butterfly knife M3 fasteners" and I was inspired to make it just a little bit cleaner. So I hid the m3 nuts in the blade and the handle. and added a cool circuit board look and a tanto blade…
Check out the latest remix with printed bushings for better consistency - Tanto Blade Balisong II Remix of Kz1nks nifty Samurai Balisong: Uses 12mm M3 hex head bolts and M3 nuts instead of printed pins Handle channels are wider so the…
i played around with the weights and the design to make this as easy to print and assemble as possible and flip good. i printed in pla 0.4mm nozzle at 0.2mm layer height but it should work with any other settings and filament. this is the…
A harmless flip comb to take to elementary school. Everyone wants one! Most folks like showing off there skills flipping them around. Some are better at it than others of course as it does take skill. This design has locking latch at the…
Fully printed working butterfly knife for training.
Zápich na dort (cake punch) - Fotbalista (footballer), gcode nastaven na kvalitu - quality 0.3 mm PLA. Velikost - dimension 115 x 169 x 2 mm. Doba tisku - time print 33 min. Pro vzhled je nápis obrácen k bedu. For appearance, the…
Hello there! I recently moved to another country, I'm used to roll cigarettes with this thing, but I couldn't find it here. So by the photos and memory, i created this version, similar to original, fully printable :) I prepared gcode…
A butterfly knife/balisong without a blade? A butterfly… nothing? A Butterfly No-Knife! After seeing videos of these things, I felt I had to try one, and thought it would be quite easy to CAD up. A few prototypes later, this is the…
This 3D printable balisong-style fidget toy is made for smooth flipping and maximum fun. Designed as a safe and simple fidget tool, it captures the motion of a butterfly knife without any sharp edges – perfect for keeping your hands busy.…
https://youtube.com/shorts/IHuoRIZewV0?feature=share Thank you to others for inspiration - I am certainly not the 1st to have this idea. Print flat on bed, feel free to use the blade to push in the pins (or, say, a screwdriver) I…
This is a 3D printable butterfly knife (balisong) prop designed for practice, display, cosplay, and film or photography use . The model is inspired by the classic balisong design but is intended strictly as a non-functional prop with a…
您好，如果您打算下载此模型，请考虑留下赞、发布制作、留下评论甚至捐赠。谢谢！ Hi There, if you plan on downloading this model please consider leaving a like, posting a make, leaving a review, or even a donation. Thank You!…
I remixed a fully printable butterfly/balisong trainer knife so that it can be printed with no issue in terms of scaling and should be as easy as print out and ready to use. I adjusted the clips a lot so that they can be printed without…
August 10th 2023 Update: Corrected latch pin size and split model in to parts for spares if needed. Full Size Lighter Holder. Check out my other designs for the mini lighter version. Print with tree supports and a brim. Category:…
This is my first project that implies mechanical parts, but in the end all worked well. The Ballistic Knife is a Special secondary weapon that appears in Call of Duty: Black Ops, Call of Duty: Black Ops II, Call of Duty: Black Ops:…
Print all five files at the same time next to each other and then assemble them using 12mm M3 socked-head bolts and M3 nuts. I recommend sanding the contact surfaces with water and a high grit and then lubricate them for better…
Meet The Rockhopper Make both yourself and your workflow at least 300% cooler with the Rockhopper, a durable, totally printable, ultra refined balisong utility knife that takes standard Stanley style blades. Those boxes and packages will…
Very basic balista. It is fully printed. No rubber band required. Works best with 3mm diameter toothpick. Never aim at people, animals, or fragile items.
Very cool original design. My son wanted it to open and close fluidly so I needed to mod a bit. I widened the handles to allow for more clearance between the knife and the frame (0.4mm per side). Added a hole to put bolts in for weight…
🎨You can find the multicolor version of this model on my Thangs page. https://than.gs/m/1331276 💰 You can obtain the commercial license for this model by joining my Thangs Membership or Patreon at the Merchant Tier or above. 🔔The keychain…
A fully printable balisong with a rounded blade, completly dull. Inspired by the Squiddy Balisong. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 2.0 Infill: 100% for best feel. Filament:…
This is fully flippable balisong knife with bushing and zen pinless design. Weight of printed parts - cca 40 grams, with aditional wight in handles 50 grams. Lenght of whole opened knife is 257mm and closed 145mm. needed parts: blade - 1x…
After printing out and playing with a few butterfly knife trainers and toys I noticed features I did and didn't like and decided to give printing my own a shot. Features I focused on were minimizing support material, a clean look,…
The Tenkai Trainer (展開) is a safe, 3D printed butterfly knife with channel handles and a pinless system that is designed for metal washers and standard balisong hardware, with the option for fully printed hardware. Thanks to this it…
my version of the butterfly knife took some time to get the weight distribution right but it now works well I printed mine in PETG and used a section of filament off the spool to act as the hinge pin on both handles to add some strength
This is a balisong trainer with improved pins. Assamble is very easy firstly you need to download the files and slice them at your own slicer and start printing(Dont forget to print 2 pins)after you printed the all parts put the pieces…
Follow Sanford Prime 's directions for this print If you like this check out my weighted/balanced flipping variant of this model here!! In the photos: Left: Smooth Sides Middle: Extended Diamond Sides Right: Sanford Prime's Trainer…
Źródło oznaczyło ten model jako treść 18+.
This is a updated version of the V2 balisong trainer knife, which includes quite a few changes, big and small, and deserves to be in a new thing design. I've firstly changed the confusing 4 latches and now made a more simple system for…
This Balisong is weighted very well, and should be printed with 100% infill for the best weight and balance. I designed the stopping mechanism to be very strong and very satisfying. Uses M3 screws to assemble the handles. Make sure to…
This is a replacement blade for Kenopy's Squiddy clone that allows you to press fit a few M4 nuts to give the design more heft and a better weight distribution. Seems to be that 2-3 nuts at the end of the blade work well.
Do you need a 3D printed comb? Well, you're in luck! This was a highly requested version of the original print-in-place butterfly knife. It took me a while to figure out how I wanted to accomplish it, and in the end it turned into a…
The ‘sharplock side handle’ part of that balisong models has the problem which can occur the bad print quality at the bottom of the print result when go printing without any other post-processing. So I applied simple tricky way to make…
This model was inspired by ThoughtFactory over on thingiverse doing this with a feeder by PETKIT. Also refer this for assembly and demo video: https://www.thingiverse.com/thing:6206548/files Goal This whole setup is done with the purpose…
Easy print, easy assembly. Snaps together with no glue needed. Butterfly knife comb balisong with a skull for all you pirates out there combing your beards. There is a separate file for just the comb and hardware if you want to use a…
Print with layer height 0.1mm (or even lower for higher "resolution")
Tolerances basically don't exist. You'll need decent calibration. Alternatively, just make the blade a little thinner in slicer, or the bushings a little taller. The holes in the blade/handles fit 6x3mm magnets. For balance, I'd print at…
print in pla i printed in 0.28 layer height cuz i needed it fast but it ended up good overall on my bambu lab a1. the pins need to be glued to the handles then cut. print the handles and pins vertically for best result. what i did is i…
Balisong Shoe Horn - Print In Place I thought it would be cool to make Balisong Shoe Horn. It reminds me of the fun Balisong comb version. Share a picture if you print one!
I wanted a printable M3 balisong that flips pretty well and uses the M3 hardware I have on hand, so I made it! Demo here: Printed in California Filaments Cloudy White PETG and Overture Cream Light Blue PLA (now removed). Parts The needed…
This is a slightly long balisong. very smooth and balanced. Slight handle bias. Printed at 90% infill, both the blades and handles. .2 layer height on a bambu p1s. I used Overture clear PETG Hardware: 2x M3 Screws 2x M3 Washers 1x M3 nut.…
This is a working comb balisong that I designed. It can be used for practice or just as a fun toy and cool comb to show friends. I recommend these settings as it worked best for me -Split the blade down the middle (Prusa slicer has this…
Great balisong that flips GREAT (lol) comes with holes for weights and even hole for weights in the blade! Basic balisong hardware is need for this bali to work and flip properly! 100% infill PETG prefered but PLA is usable (less…
Training butterfly knife with japanese style tanto blade.
I printed This on 0.2 layer height and 100% infill. Filament used is transparent TPU (A82). As added weight I used 3, 5mm magnetic balls (fidget toy). Overall it adds 3.30g. It fits quite tightly so it wont fall of. But adding the balls…
In the original model, if I squeezed the handle too hard I could pinch the blade which prevented it from moving. I added a back to prevent that. Make sure your flow is spot on or you'll have to sand the handles to get the blade to not…
Butterfly knife with simbols from Berserk and the famous Dragonslayer as it's blade. Filament used in picture is PETG for the red and PLA+ for the black, both printed with 100% infill though it's not obligatory to do so, no supports…
Insert works with both Arasaka Balisong Butterfly Knife versions, this insert is for V2 specifically. To print Arasaka logo into the case on a same bottom layer, its possible to do with single extruder. See my guide how to here: MMU…
Summary Add a pop of color to your Nabalis canyon. I'm pretty happy with how these turned out. The fitment of these is pretty tight. Trim off edges and corner bulging as needed. Cut the channel insert in the middle to mix colors. The…
The Bali-Brush – A Unique Bouldering Brush with a Twist Bring style and function to your climbing gear with the Bali-Brush, a one-of-a-kind bouldering brush inspired by the smooth, folding mechanism of the iconic Balisong (butterfly…
este mate debe llevar soportes de arbol con angulo de 45 grados para poder sostener de manera apropiada la boca y que salga todo bien, por el resto no lleva mas complicaciones, los soportes solo en la base, no en el modelo, asi lo imprimi…
This is a quick little balisong trainer that can be printed in around 4 hours. It's quite durable if you use real screws instead of the printed pins I included, but I'm still working on finding the screws locally. I've also included the…
Designed to fit most balisong trainers. Tested with a Squid Industries Squiddy and a Glidr Arctic 2.
Remix version of butterfly knife / balisong based on Benchmade 62 Balisong Butterfly Knife M3 Fasteners. Print Easy to print - no support needed. Files are oriented - recommended to print with the orientation on stl files. Infill 40%,…
Squiddy-B Inspired Balisong. Print with 100% Infill for best results. 0.2mm looks great. If there are any legal issues, I will promptly remove the model.
The front cupholders on my Mazda 3 (2019 Hatch) were not holding things well enough, especially when turning. This should fit other Gen 4 Mazda 3's that have the same cupholders with a lid. This fills in the blank space meant to allow the…
It's a great, easy to assemble tabletop gadget. With my rubberband it shoots about 5 meters. stand slope is 15 degrees.
It is designed for play purposes only. It is a comb that looks like a butterfly knife and has no other purpose. It is a toy made purely for fun and flipping.
The goal of this project was to create a Balisong (butterfly knife) than can hold a lighter. The project was successful because the Balisong can hold the lighter, looks cool and has good flipping action (it also has a compliant mechanism…
If you're finding this by itself, be sure to see the original first: https://www.printables.com/model/846554-butterfly-knife-print-in-place-balisong This is just a small edit to the original. I altered the handle to remove the serration…
This 3D printable balisong-style fidget toy is made for smooth flipping and maximum fun. Designed as a safe and simple fidget tool, it captures the motion of a butterfly knife without any sharp edges – perfect for keeping your hands busy.…
MaVeRa Balisong Trainer Butterfly Knife This model has been cleaned of unnecessary play through several printing samples and real tests. If your printer is set up well, like my MK4 :) you will get a perfectly balanced butterfly knife…
