Tanto Balisong, Tweaked for Trick Flips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very cool original design. My son wanted it to open and close fluidly so I needed to mod a bit. I widened the handles…
- Ocena
- 4,667 / 5
- Polubienia
- 32
- Pobrania
- 327
- Wydruki
- 5
- Wyświetlenia
- 2090
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Very cool original design. My son wanted it to open and close fluidly so I needed to mod a bit.
I widened the handles to allow for more clearance between the knife and the frame (0.4mm per side).
Added a hole to put bolts in for weight (M4x5mm I think).
Reinforced the area where the knife blade contacts the handles as my original print was prone to breaking there. The little hole allows for a finishing nail or similar to take the load of the blade snapping open.
Print Settings
Printer:
Geeetech A10M
Rafts:
No
Yes
Resolution:
0.2mm
25% Gyroid
Filament: Hello3D PLA Magic Coal, Grey and Silk Blue mixed 50-50% for the handles
Notes:
Printed the handles on their sides to have good strength lines around the pins. A little bit of work to get the supports out, but made easier my 'not supporting bridges'.
Category: Toys & Games