Tanto Balisong, Tweaked for Trick Flips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very cool original design. My son wanted it to open and close fluidly so I needed to mod a bit. I widened the handles…
- Rating
- 4.667 / 5
- Likes
- 32
- Downloads
- 327
- Makes
- 5
- Views
- 2,090
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
Very cool original design. My son wanted it to open and close fluidly so I needed to mod a bit.
I widened the handles to allow for more clearance between the knife and the frame (0.4mm per side).
Added a hole to put bolts in for weight (M4x5mm I think).
Reinforced the area where the knife blade contacts the handles as my original print was prone to breaking there. The little hole allows for a finishing nail or similar to take the load of the blade snapping open.
Print Settings
Printer:
Geeetech A10M
Rafts:
No
Yes
Resolution:
0.2mm
25% Gyroid
Filament: Hello3D PLA Magic Coal, Grey and Silk Blue mixed 50-50% for the handles
Notes:
Printed the handles on their sides to have good strength lines around the pins. A little bit of work to get the supports out, but made easier my 'not supporting bridges'.
Category: Toys & Games