19" 1U Server Rack Cover Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Because I have a lack of equipment to fully stock my 19" server rack, and that metal cover plates are quite expensive,…
- Rating
- 4.8 / 5
- Likes
- 159
- Downloads
- 647
- Makes
- 5
- Views
- 4,199
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Because I have a lack of equipment to fully stock my 19" server rack, and that metal cover plates are quite expensive, I decided to print my own.
I have made 3 models;
1; A 1U blank cover plate
2; A 1U cover plate with horizontal vent openings
3; A 1U cover plate with vertical vent openings
The parts are interchangable, in the photo I used the sides of the horizontal vent model with the middle of the blank model.
Don't have a printer yourself? Contact me on my Etsy store and I'll be happy to print it for you: https://www.etsy.com/shop/XDr4g0nX3DPrinting
Print Settings
Printer Brand:
RepRap
Printer:
GEEETech i3 Pro B Metal
Rafts:
No
Supports:
Yes
Resolution:
.2mm layer height
Infill:
35%
Notes:
Rotate the parts on their front and use support for the side parts.
Post-Printing
After printing, just remove the supports.
Then sand the flaps a little bit so there is a nice flat surface, and glue it together using CA glue (CyanoAcrylate).
How I Designed This
Having an IKEA LackRack myself, and actual server cages at work. I jumped back and forth to design a model that would fit both of them.
I first took the measurements of actual 1U equipment and then adjusted the inside stabilizing fins so they would fit in both.
Category: Other