Scottish Tension Spinning Wheel Bobbin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Someone made a request if I could design and print a bobbin for her Scottish tension spinning wheel. I am releasing it…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 47
- Makes
- 0
- Views
- 597
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Someone made a request if I could design and print a bobbin for her Scottish tension spinning wheel.
I am releasing it on here so that other people who might need this model can use it.
Don't have a printer yourself? Contact me on my Etsy store and I'll be happy to print it for you: https://www.etsy.com/shop/XDr4g0nX3DPrinting
Print Settings
Printer Brand:
RepRap
Printer:
GEEETech i3 Pro B Metal
Rafts:
No
Supports:
Yes
Resolution:
.4mm layer height
Infill:
15%
Notes:
I used a .5mm nozzle for a quick print.
Both sides of the bobbin can be printed flat without rafts or support, I printed the spindle upright with support on the bottom.
Post-Printing
Assembly
After printing the sides and the spindle of the bobbin should fit snuggly, if they do not, sand it a bit and try again.
For a good fix, I used CA glue (CyanoAcrylate).
How I Designed This
I took the measurements from an existing bobbin and redesigned the parts in Sketchup with a requested lotus pattern.
Category: DIY