Vornado 293 Fan Knob
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original knob broke when I dropped the fan. This is a replacement.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 95
- Makes
- 0
- Views
- 549
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution
There are two models. One is smooth and matches the original knob. The one with a seam should force the slicer to place the z scar aligned with the indicator. The picture is the smooth version, where the seam is slightly misaligned. It bothers me, but not enough to re-print it.
I'd recommend putting extra wall layers because the torque on the switch is a bit high to turn it.
The knob has a friction fit with the switch. This means it won't fall off once it's on. That's good.
However, it also means it take a bit of force to get it onto the switch. I actually dislodged the switch when pressing it on. That's bad. Needed to unscrew the back plate, unplugged first, of course. Then it was easy to re-install the switch into the back plate and hold the switch in place while pushing the new knob on.