Vornado 293 Fan Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original knob broke when I dropped the fan. This is a replacement.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 549
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
There are two models. One is smooth and matches the original knob. The one with a seam should force the slicer to place the z scar aligned with the indicator. The picture is the smooth version, where the seam is slightly misaligned. It bothers me, but not enough to re-print it.
I'd recommend putting extra wall layers because the torque on the switch is a bit high to turn it.
The knob has a friction fit with the switch. This means it won't fall off once it's on. That's good.
However, it also means it take a bit of force to get it onto the switch. I actually dislodged the switch when pressing it on. That's bad. Needed to unscrew the back plate, unplugged first, of course. Then it was easy to re-install the switch into the back plate and hold the switch in place while pushing the new knob on.