The all M5 sharpening guide/ Schärfhilfe no support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tired of all the sharpening helpers for your tools requiring esoteric imperial bolts or mix of M8, M5 and what not ?
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 71
- Makes
- 1
- Views
- 449
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Required hardware:
2x 608 bearing/Lager
2x M5x12mm countersunk/Senkkopf
2x M5 nut/Mutter
2x M5 Hex bolt or threaded rod+nut/sechskant Schraube oder Gewindestange+Mutter
(60mm → 40mm max)
2x M5 washer/Unterlegscheibe (only recommended)
2x M5 wing nut or regular/Flügelmutter oder normal
----------
24° ≙ ~35mm (35.12mm) Pic 3, Sketch1/Skizze1 of the f3d has construction lines for that.
minimal width/Mindestbreite stl: 9mm
designed for 0.2 Layer height, possibly 0.4 nozzle, printable without support.
stl files should have the correct orientation.
In the f3d the parameter for the minimum width is called “b_min” and is not infinetly scalable but whatever.
The 2 files are for left and right side each, but if you wish, you can always print each twice at your own risk