Arduino membrane keyboard (4x4,3x4) case and mounting plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Arduino membrane keyboard (4x4,3x4) case and mounting plate made for vertical position and possible hidden ribbon cable
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 122
- Makes
- 0
- Views
- 692
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Arduino membrane keyboard (both 4x4,3x4 are very similar in actual size) case and mounting plate made for vertical position and possible hidden ribbon cable.
it has 6 mounting holes (4mm diameter) for woodscrews. There are later covered with the case. You can pick if you want full case with some hole behind where you will lead the ribbon cable or case with opening at the bottom if you want to lead the ribbon cable just downward.
The keyboard itself will just slide in from bottom to the top. And the outer case will prevent it from falling out. The outer case is just friction fit with 0.2mm gap. So some sanding of the mounting plate might be needed depending on your printer settings.
Of course you can go to the onShape.com and edit the original model which is parametrical and is very easy to update:
https://cad.onshape.com/documents/7179a8cb62303c43e59af0a4/w/202d332c20156e576827787c/e/b52e5f7b2d92f58c6cff9dc6
