1 / 3
Arduino membrane keyboard (4x4,3x4) case and mounting plate — zdjęcie 1
1 / 3

Arduino membrane keyboard (4x4,3x4) case and mounting plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Arduino membrane keyboard (4x4,3x4) case and mounting plate made for vertical position and possible hidden ribbon cable

Ocena
0 / 5
Polubienia
10
Pobrania
122
Wydruki
0
Wyświetlenia
692
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Arduino membrane keyboard (both 4x4,3x4 are very similar in actual size) case and mounting plate made for vertical position and possible hidden ribbon cable.

it has 6 mounting holes (4mm diameter) for woodscrews. There are later covered with the case. You can pick if you want full case with some hole behind where you will lead the ribbon cable or case with opening at the bottom if you want to lead the ribbon cable just downward.

The keyboard itself will just slide in from bottom to the top. And the outer case will prevent it from falling out. The outer case is just friction fit with 0.2mm gap. So some sanding of the mounting plate might be needed depending on your printer settings.

Of course you can go to the onShape.com and edit the original model which is parametrical and is very easy to update:
https://cad.onshape.com/documents/7179a8cb62303c43e59af0a4/w/202d332c20156e576827787c/e/b52e5f7b2d92f58c6cff9dc6

Tagi