1 / 9
PanelDue 5i enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an angled case for a PanelDue 5i to be mounted on a Ultimaker2 or clone.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 218
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is an angled case for a PanelDue 5i purchased fall 2018 . It can be mounted on a Ultimaker2 or clone. The microSDcard on the lower left is accessable by a nice rounded cutout. The panel is fixed with ø3x10mm plastic selftaping screws(source https://www.wegertseder.com/ArticleDetails.aspx?AKNUM=3662#nav). Taping M3 might also work. The whole case is attached to the printer body by 2 of these screws and 2 new holes in the front. Using double sided tape to avoid holes may work as gravity is catched by the step in the back.