Blitzer Beetle body mount front and rear
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shell Holder replacement for the Tamiya Blitzer Beetle Parts: 9115049
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 91
- Makes
- 0
- Views
- 809
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I've lost the body mounts over the years so I desided I'd build new ones. I didn't have the originals to hand, so the shape of the parts are freely chosen and built with the focus on easy printability.
Parts: 9115049
I added a version where you can change the mounting pin. if it breaks, you can quickly replace it and save printing time and filament.
I added holes to be able to screw the pin if necessary, I didn't need to do that as everything was tight enough
my print settings:
0.2mm
4 perimeter
20% infill
no supports
shellholder_rear_v2_lower: this version has the pins a little further down
Please note: since I had to replace both parts, I don't know if they each fit in combination with the originals, I'll be happy to get feedback!