1 / 2
MGN9 to 20mm V-Slot mounting surface plate/rail — image 1
1 / 2

MGN9 to 20mm V-Slot mounting surface plate/rail

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Allows MGN9 linear rail to be securely mounted to 20mm v-slot extrusion with no play at the expense of 1mm offset.

Rating
5 / 5
Likes
63
Downloads
478
Makes
2
Views
3,847
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

MGN9 Linear Rail ever so slightly sits in the v-slot of 20mm v-slot extrusions due to the chamfers. Common t-nuts can't clamp down on a 20mm v-slot rail enough and as a result the rail is not held 100% secure. Aditionally the chamfer on the linear rails can't be considered a reference surface and may cause issues with spacing or laying flat against the extrusion.

This simply gives the 9mm linear rail a mounting surface on top of the 20mm extrusion. Compatible with LMaker's KP3S linear rail mod with no additional modifications required.

Model is compatible with the slightly longer t-nuts some have encountered.

I used PC filament with a 1mm thick bottom layer resulting in 100% fill in the location needed.

Do Not use a filament that exhibits creep, PLA is a no-go.

Print a set of 4 for the full LMaker mod.

Tags