MGN9 to 20mm V-Slot mounting surface plate/rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows MGN9 linear rail to be securely mounted to 20mm v-slot extrusion with no play at the expense of 1mm offset.
- Ocena
- 5 / 5
- Polubienia
- 63
- Pobrania
- 469
- Wydruki
- 2
- Wyświetlenia
- 3824
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
MGN9 Linear Rail ever so slightly sits in the v-slot of 20mm v-slot extrusions due to the chamfers. Common t-nuts can't clamp down on a 20mm v-slot rail enough and as a result the rail is not held 100% secure. Aditionally the chamfer on the linear rails can't be considered a reference surface and may cause issues with spacing or laying flat against the extrusion.
This simply gives the 9mm linear rail a mounting surface on top of the 20mm extrusion. Compatible with LMaker's KP3S linear rail mod with no additional modifications required.
Model is compatible with the slightly longer t-nuts some have encountered.
I used PC filament with a 1mm thick bottom layer resulting in 100% fill in the location needed.
Do Not use a filament that exhibits creep, PLA is a no-go.
Print a set of 4 for the full LMaker mod.