Test lead / cable hanger for HDX wire shelving
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular test lead hanger that clips onto the outside of HDX wire shelving (or any other shelving with 7/16" tubing).
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 56
- Makes
- 1
- Views
- 484
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
All of the test lead hangers I've seen so far want to be mounted on a wall, and give you a fixed quantity of slots to hang cables from. I wanted to customize how many slots I got, and I wanted to attach it to some wire shelving that I have, so I modeled this up. It clips to the edge of some HDX wire shelving, and hangs off the side; you can clip it either to the front or to the side. My wire shelving seems to use 7/16" main tubing, and this attaches with a satisfying “click!” to that. A dovetail joint on the back provides lateral support between neighboring hangers.
I managed to cram 12 of these on a build plate on my Bambu X1 Carbon. I used some Hatchbox PLA but I'm sure any PLA would probably work fine. There is an obvious orientation to print it in (flat side down); print it like that. My printer seemed to have no trouble with the bridges on default settings at 0.20mm layer height, but if you have a different printer, you presumably know its capabilities better than I do.
Onshape model available at https://cad.onshape.com/documents/638fd74c220d3b96f3d71178/w/50bbb2fc0cccf5ed90223be9/e/ac7409b1f0f20812dc04a035. If I were to do it again I would probably reduce the height a little bit so it actually matches the shelving, but, you know, for now, it is what it is, and it is certainly useful as is.