Strong IKEA Samla Clip Clasp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stronger than usual Samlabox Clip which originally should be 24cm long (mine, not the IKEA one) For 45 & 65 Ltr. boxes.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 146
- Makes
- 3
- Views
- 837
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
For 45 & 65 Litres boxes
I store my Filament in Samlaboxes, keeping them shut with various clips. I wanted to achieve a tighter connection between lid an box, so I decided to make my own.
Originally the plan was to print a 24 cm long clip, so you only need to clamp and unclamp one Clip per side, but printing around three hours for a single Box clip even with 250 mm/s, is too much for one clip, but feel free, the 24 cm model ist also attached.
Print with 100% infill
I would use Brim
Printed mine with PLA, everything else should also be fine except TPU, I mean you can print it with TPU but can't use it