Strong IKEA Samla Clip Clasp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stronger than usual Samlabox Clip which originally should be 24cm long (mine, not the IKEA one) For 45 & 65 Ltr. boxes.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 146
- Wydruki
- 3
- Wyświetlenia
- 838
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
For 45 & 65 Litres boxes
I store my Filament in Samlaboxes, keeping them shut with various clips. I wanted to achieve a tighter connection between lid an box, so I decided to make my own.
Originally the plan was to print a 24 cm long clip, so you only need to clamp and unclamp one Clip per side, but printing around three hours for a single Box clip even with 250 mm/s, is too much for one clip, but feel free, the 24 cm model ist also attached.
Print with 100% infill
I would use Brim
Printed mine with PLA, everything else should also be fine except TPU, I mean you can print it with TPU but can't use it