Allen key hex driver handles and gridfinity base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make you own R/C hobby style hex drivers. Just cut the "L" off a standard allen wrench to make the bit.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 57
- Makes
- 0
- Views
- 630
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Make your own R/C hobby style hex(allen) drivers.
Just get a cheap set of allen keys and cut the “L” off and insert it into the printed handle.
I found a set of allen keys for about $3 at Wal-mart.
Tolerances designed for ASA/ABS might be slightly different of other filaments.
You might need to press fit or glue the bit into the handle depending on your printer tolerances.
Print with 4-5 wall loops to make sure the handles are solid around where the bits are inserted.
Includes the most common metric sizes for hobby and 3d printing. 1.5mm, 2mm, 2.5mm, and 3mm
Gridfinity base included.