Amateur Radio TYT TH-6800 50 cal Go Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 50 cal metal ammo case with a TYT TH-6800 and 2 Batteries
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 109
- Makes
- 0
- Views
- 1,457
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
I made an upright mount for a TYT TH-6800 Dual Band VHF/UHF transceiver to fit in a 50 cal metal ammo box with batteries. This makes an easy go kit with a little more power than an HT radio. I couple this with a tiny mag mount antenna which sticks on the open ammo can lid. It could also be used with a small (twin lead type) J-Pole which would roll up and could be stored in the same box with an antenna cable.
The design allows for the radio to be upright so you can see the display. It also routes the sound from the speaker upward and out for much better sound. I added Anderson PowerPoles to the radio power connector and I added a tiny antenna cable to make it easier to connect an antenna cable from the top without removing the radio.
For this I grabbed a couple of spare batteries I had from an old UPS unit. These are standard lead-acid batteries available for about $25 each. The two fit perfectly side to side which gives me about 14Ah of power. I added a small voltmeter on top so I can monitor the battery levels and added PowerPoles to that for easy charging.
The STL files include all the pieces for the radio case and for the power meter. All were printed using PETG at 15% infill with no supports needed. The case is assembled with M3 wood/metal screws.
Using a metal ammo box allows you to utilize it as a ground plane on a mag mount antenna. If you use another antenna that does not need the metal then a plastic case would work. There are no holes drilled into the case so it remains sealed and weatherproof.
I do all my design using OpenSCAD which is free to use. I include all the source files here in case you need to tweak something.
Here are the Amazon links for the voltmeter and rocker switch I used:
Voltmeter: https://www.amazon.com/gp/product/B0761MG9NS
Rocker Switch: https://www.amazon.com/gp/product/B07HHY152Z