Magnetic Split handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A handle meant to surface-mount to two surfaces that come together in a tight joint.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 49
- Makes
- 0
- Views
- 344
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These handles were designed for ease of installation, lay-flat form factor, and magnetic coupling. Two wood screws (or machine screws) on each end of the pivot points prevent axis misalignment. The pivots are comprised of a 1" no 6. machine screw and a corresponding #6 nylock nut.
Depending on your application, an additional latch may be necessary to keep the two surfaces tight together.
BOM:
QTY 4 - 1" machine screw: https://www.mcmaster.com/91772A153/
QTY 4 - #6 nylock nut: https://www.mcmaster.com/90631A007/
QTY 8 - #6 pan-head wood screw or machine screw length sized to fit your application
QTY 2 - pivot piece 1, pivot piece 2, and handle half
QTY 6 - DIA 8mm x 3mm magnets.