Inch threads up to 1" for freecad
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.90 – €1.10 net (excluding VAT)
For file: Adapter_male 1_2_to_male_3_8_0.2mm_PETG_MINI_1h4m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.00 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.07 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
substraction bodies with a tolerance of 0.3 mm (for printing in PETG)
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 140
- Makes
- 0
- Views
- 668
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed several inch threads for building waterpipe adapters in Freecad. They should be printed in PETG.
The tools in the Fastener workbench did not have the correct pitches and tolerances. Here are some substraction bodies with a tolerance of 0.3 mm. The adapter is for example only.