1 / 4
ADXL345 mount for Sprite Sylph
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapts ADXL345 accelerometer for Sprite Sylph. Includes mount for bed.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 36
- Makes
- 0
- Views
- 634
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Uses the heatsink fan mount points to connect an ADXL to the Sprite Sylph.
Parts needed:
- 4x M3 heat-set inserts
- 2x M3x25 machine screws
- 2x M3x10 (ish) machine screws
- 2x M3x5 machine screws
Assembly:
- Print ADXL mount and bed spacer
- Press heat-set inserts into the 4 vertical holes of the ADXL mount
- Use 2x M3x5 machine screws to attach the ADXL to its mount. The header pins should hang off the edge of the mount
Usage:
- Hotend:
- Remove and save the 2 heatsink fan machine screws that attach to the body of the Sprite
- Use 2x M3x25 machine screws to attach the ADXL holder to the Sprite body through the heatsink fan mount points
- Run input shaping tests
- When done, remove ADXL holder and reinstall original machine screws
- Bed (for bedslingers):
- Use 2x M3x10 machine screws to attach the mount to the bed, using the provided spacer between the screws and the bed to prevent damage