Wahl Color Pro #1 Guard (3mm)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.35 – €0.43 net (excluding VAT)
For file: guard%203mm_0.4n_0.1mm_PETG_COREONE_27m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.39 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 27 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement #1 (3mm) guard for the Wahl Color Pro 79300-400 models.
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 932
- Makes
- 6
- Views
- 3,650
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
Replacement guard for the red, #1 3mm 1/8th inch guard for the Wahl Color Pro Hair Clipper Kit 79300 400.
The clip on mine broke, so 3d printing to the rescue.
Printing Notes
Material
I printed in PETG as the original guard's clip broke due to a rigidity issue, however PLA may be fine. I don't have support dialed in with PETG, which is one reason the layer lines get so rough on the face of my print.
Orientation
Since I was having roughness on the print, I wound up orienting the blades face down on the print bed so that they would be smooth as those are what come in contact with my head. However, this results in the face with the numbers visible being even more rough due to the use of supports.