Wahl Color Pro #1 Guard (3mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement #1 (3mm) guard for the Wahl Color Pro 79300-400 models.
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 932
- Wydruki
- 6
- Wyświetlenia
- 3650
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Replacement guard for the red, #1 3mm 1/8th inch guard for the Wahl Color Pro Hair Clipper Kit 79300 400.
The clip on mine broke, so 3d printing to the rescue.
Printing Notes
Material
I printed in PETG as the original guard's clip broke due to a rigidity issue, however PLA may be fine. I don't have support dialed in with PETG, which is one reason the layer lines get so rough on the face of my print.
Orientation
Since I was having roughness on the print, I wound up orienting the blades face down on the print bed so that they would be smooth as those are what come in contact with my head. However, this results in the face with the numbers visible being even more rough due to the use of supports.