1 / 4
Anycubic Kobra Cover Plate for V-slot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
V-slot Cover Plate
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 221
- Makes
- 4
- Views
- 862
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Present my view of the V-slot cover. Most of the time we have filament pieces and dust inside the V-slot, so I created this model to avoid this problem. Especially for the Anicubic Kobra you'll need:
-on the left side 2X 19.5_cm.stl
-on the right side 1X 16_cm.stl, 1X 19.5_cm.stl
I also left the .f3d file of my model so that you could create your own length and width.
Printing:
Material: PLA or other
Nozzle: 0.4 mm
Layer Height: 0.2mm
Support: No
Infill: 15%