1 / 4
Anycubic Kobra Cover Plate for V-slot — zdjęcie 1
1 / 4

Anycubic Kobra Cover Plate for V-slot

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

V-slot Cover Plate

Ocena
5 / 5
Polubienia
28
Pobrania
221
Wydruki
4
Wyświetlenia
862
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Present my view of the V-slot cover. Most of the time we have filament pieces and dust inside the V-slot, so I created this model to avoid this problem. Especially for the Anicubic Kobra you'll need: 
-on the left side 2X 19.5_cm.stl

-on the right side 1X 16_cm.stl, 1X 19.5_cm.stl

I also left the .f3d file of my model so that you could create your own length and width.

Printing:

Material: PLA or other

Nozzle: 0.4 mm

Layer Height: 0.2mm

Support: No

Infill: 15%

Tagi